Click image to view full size image
Description:
Injection Molding Machine1.Horizontal Clamping and Injection design
2.Direct Hydraulic Clamping system
3. High effiency
| Screw Diameter | mm | 25 | 28 | 32 |
| Screw L/D ratio | L/D | 22.4 | 20 | 17.5 |
| Maximum Injection Pressure | Bar | 2912 | 2321 | 1777 |
| Theoretical Shot Volume | cm3 | 68 | 86 | 112 |
| Maximum ShotWeight(PS) | g | 63 | 79 | 103 |
| oz | 2.2 | 2.8 | 3.7 | |
| Injection Rate | cm3/sec | 55 | 70 | 92 |
| Clamping Force | ton | 68 | ||
| Mold Size | mm | 320×320 | ||
| Minimum Mold Thickness | mm | 150 | ||
| Opening Stroke | mm | 450 | ||
| Open Daylight | mm | 600 | ||
| Ejector Force | ton | 2.7 | ||
| Ejector Stroke | mm | 100 | ||
| Hydraulic System Pressure | Bar | 140 | ||
| Oil Tank Volume | L | 255 | ||
| Electric Power | hp(kW) | 15(11) | ||
| Barrel Heating Power | kW | 4.3 | ||
| Total Wattage | kW | 15.3 | ||
| MachineDimensions(approx.) | m | 4.4×1.1×1.6 | ||
| MachineWeight(approx.) | ton | 2.7 | ||
Direct hydraulic clamping design makes high qualityproduction
Use-friendly LCD display shows various functions
No lubrication needed and no oil contamination, ensure easymaintenance and prolong working life
Dual injection cylinder design can be operated very stably andquietly
The clamping force is distributed evenly, the product madeinside the mold is accurate and stalbe
Special design in screw and barrel
The P.I.D. temperature control is accurate for every section
Suitable to produce as baby care commodity, daily use commodity,medical devices, electronic parts...
Horizontal type Injection Molding Machine
